Agilent Technologies 16048A Notices

Notices

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright.All

rights are reserved. No part of this document may be photocopied, reproduced, or

translated to another language without the prior written consent of the Agilent

Technologies.

Agilent Technologies Japan, Ltd.

Component Test PGU-Kobe

1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan

The manual’s printing date and part number indicate its current edition. The

printing date changes when a new edition is printed. (Minor corrections and

updates that are incorporated at reprint do not cause the date to change.) The

manual part number changes when extensive technical changes are incorporated.

1990 First Edition (part number: 16048-90000)

November 1998 Second Edition (part number: 16048-90001)

August 1999 Third Edition (part number: 16048-90001)

March 2000 Fourth Edition (part number: 16048-90001)

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific WARNINGS elsewhere in this manual may impair the

protection provided by the equipment. In addition it violates safety standards of

design, manufacture, and intended use of the instrument.

Agilent Technologies assumes no liability for the customer’s failure to comply

with these requirements.

NOTE 16048A comply with INSTALLATION CATEGORY I and POLLUTION

DEGREE 2 in IEC61010-1. 16048A are INDOOR USE product.