Agilent Technologies 16048A service manual Certification

	•	Ground The Instrument
		To avoid electric shock hazard, the instrument chassis and cabinet must be
		connected to a safety earth ground by the supplied power cable with earth
		blade.
	• DO NOT Operate In An Explosive Atmosphere
		Do not operate the instrument in the presence of flammable gasses or fumes.
		Operation of any electrical instrument in such an environment constitutes a
		definite safety hazard.
	• Keep Away From Live Circuits
		Operating personnel must not remove instrument covers. Component
		replacement and internal adjustments must be made by qualified maintenance
		personnel. Do not replace components with the power cable connected. Under
		certain conditions, dangerous voltages may exist even with the power cable
		removed. To avoid injuries, always disconnect power and discharge circuits
		before touching them.
	• DO NOT Service Or Adjust Alone
		Do not attempt internal service or adjustment unless another person, capable of
		rendering first aid and resuscitation, is present.
	• DO NOT Substitute Parts Or Modify Instrument
		Because of the danger of introducing additional hazards, do not install
		substitute parts or perform unauthorized modifications to the instrument.
		Return the instrument to a Agilent Technologies Sales and Service Office for
		service and repair to ensure that safety features are maintained.
	•	Dangerous Procedure Warnings
		Warnings, such as the example below, precede potentially dangerous
		procedures throughout this manual. Instructions contained in the warnings must
		be followed.
	Dangerous voltages, capable of causing death, are presenting this instrument.
WARNING
	Use extreme caution when handling, testing, and adjusting this instrument.

Certification

Agilent Technologies certifies that this product met its published specifications at the time of shipment from the factory. Agilent Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology, to the extent allowed by the Institution’s calibration facility, or to the calibration facilities of other International Standards Organization members.

3