Scan Configuration Commands (see page 226 in the User’s Guide)ROUTe
:SCAN (@<scan_list>)
:SCAN?
:SCAN:SIZE?
TRIGger
:SOURce {BUS|IMMediate|EXTernal|ALARm1|ALARm2|ALARm3|ALARm4|TIMer}
:SOURce?
TRIGger
:TIMer {<seconds>|MIN|MAX}
:TIMer?
TRIGger
:COUNt {<count>|MIN|MAX|INFinity}
:COUNt?
ROUTe
:CHANnel:DELay <seconds>[,(@<ch_ list>)]
:CHANnel:DELay? [(@<ch_list>)]
:CHANnel:DELay:AUTO {OFF|ON}[,(@<ch_list>)]
:CHANnel:DELay:AUTO? [(@<ch_list>)]
FORMat
:READing:ALARm {OFF|ON}
:READing:ALARm?
:READing:CHANnel {OFF|ON}
:READing:CHANnel?
:READing:TIME {OFF|ON}
:READing:TIME?
:READing:UNIT {OFF|ON}
:READing:UNIT?
FORMat
:READing:TIME:TYPE {ABSolute|RELative}
:READing:TIME:TYPE?
ABORt
INITiate
READ?
Scan Memory Commands (see page 235 in the User’s Guide)DATA:POINts?
DATA:REMove? <num_rdgs>
SYSTem:TIME:SCAN?
FETCh?
R? [<max_count>]
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
3