Additional Safety Information
The following general safety precautions must be observed during all phases of operation of this instrument.
CAUTION • Use the device with the cables provided.
•Repair or service that is not covered in this manual should only be performed by qualified personnels.
WA R N I N G • Do not use the device if it appears damaged or defective.
•Observe all markings on the device before connecting any wiring to the device.
•Do no operate the device in the presence of flammable gases or fumes.
•Do no install substitute parts or perform any unauthorized modification to the device.
Failure to comply with these precautions or with specific warn- ings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agi- lent Technologies, Inc. assumes no liability for the customer’s failure to comply with these requirements.
This product is designed for use in compliance with:
•IEC
•USA:
•Canada: CSA C22.2 No.
For further information on safety, refer to the 82357B User’s Guide.
IV
