1-19
Setting Up the Infiniium DCA
Step 8. Connect a Printer
3Turn the power off the Infiniium DCA. Do not exit the online Help before
turning the instrument off.
4Connect the printer to the instrument’s rear-panel Parallel port. Refer to
“Rear-panel features” on page 3-6 to locate the Parallel port. Use the cable
that came with your printer.
5Turn the printer power on.
6Wait five seconds and then turn the power on the Infiniium D CA again.
7The following message appears. Touch No.
8The following message appears. Touch OK.
9The instrument
automatically recognizes
the printer connected on
the printer port and
displays the Add Printer
Wizard. Touch Next.