1-3
Setting Up the Infiniium DCA
General Safety Considerations
WARNING If this product is not used as specified, the pr otection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are in tact) only.
WARNING No operator serviceable parts inside. Refer servicing to qualified
service personnel. To prevent electrical shock do not remove covers.
WARNING To prevent electrical shock, disconnect th e instrument from mains
before cleaning. Use a dry cloth or one slightly dampened with wat er
to clean the external case parts. Do not attemp t to clean internally.
CAUTION Do not use too much liquid in cleaning the inst rument. Water can enter the
front-panel keyboard, damaging sensitive elec tronic components.
WARNING This is a Safety Class 1 Product (provided with a p rotective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor insi de or outside of the
instrument is likely to make the instrument dangerous. Intentional
interruption is prohibited.
CAUTION VENTILATION REQUIREMENTS: When installing the product in a cabinet, the
convection into and out of the product must not b e restricted. The ambient
temperature (outside the cabinet) must be less than the maximum operating
temperature of the product by 4° C for every 100 watts dissipated in the
cabinet. If the total power dissipated in the cabinet is greater than 800 watts,
then forced convection must be used.
CAUTION This product is designed for use in Installation Category II and Pollution
Degree 2 per IEC 1010 and 664 respectively.
Installation Category: Installation Categories (overvoltage categories) are
determined by the transient over voltage levels that may be expected. CAT I:
Mains isolated. CAT II: Line voltage in appliance and to wall outlet. CAT III:
Line voltage behind wall outlet to next level of dist ribution.