ContentsContents-1
1Setting Up the Infiniium DCA
Step 1. Inspect the Shipment 1–5
Step 2. Install any Modules 1–9
Step 3. Consider Environmental Specifications 1–10
Step 4. Connect the Keyboard and Mouse (Optional) 1–11
Step 5. Connect the Line Cord 1–12
Step 6. Turn on the line power 1–15
Step 7. Set the time and date 1–17
Step 8. Connect a Printer 1–18
Step 9. Calibrate the Touch Screen 1–22
Step 10. Configure the Instrument on a LAN 1–23
Step 11. Avoid Costly Repairs 1–24
Step 12. Perform a Module Calibration 1–26
Step 13. For More Information 1–29
Cleaning Connections for Accurate Measurements 1–30
Returning the Instrument for Service 1–39
Hard Drive Recovery 1–42
Agilent Technologies Service Offices 1–43
2Working in Comfort
3Using the Infiniium DCA
Eye/Mask Mode 3–7
Oscilloscope Mode 3–8
TDR/TDT Mode 3–9
Using Plug-in Modules 3–10
Using the Touch Screen 3–12
Using the Quick Measure Feature 3–13
If the Display Goes Blank 3–14
Hiding and Moving Dialog Boxes 3–15
Menus 3–16
4Using the Built-In Information System
The Infiniium DCA Help Contents 4–3
Description of the Contents Topics 4–4
Getting Help While Changing Instrume nt Settings 4–6
Learning About Measurements Results 4–7