99
Chapter 2: Task Guide
Using Symbols
To delete user-defined symbols
1. Under the Symbol tab, select the User Defined tab.
2. Select the label y ou want to delete symbols from.
3. Select the symbol to delete.
4. Select the Delete button.
5. Repeat steps 3 and 4 to delete other symbols, if desired.
To load user-defined symbols

If you have already saved a configuration file, and the configuration

included user-defined symbols, load the file with its symbols, as

follows:

1. In the menu ba r of your analyzer window, select File and then Load
Configuration....
2. In the Load Configuration dial og, select the directory and filename to be
loaded.
3. Select the target of the load operation.
4. Select Load.
User-defined symbols that were resident in t he logic analyzer when the
configuration was saved are now loaded and ready to use.
To enter symbolic label values

When entering label values in the trigger sequence:

1. Choose the Symbols or Line #s number base.
2. Select the Absolu te XXXX button.
3. In the Symbol Selector dialo g, select the symbol you want to use. All of
your symbols for the current label, regardless o f type, will be available in
the dialog.
Use the Search Pattern (see page162) field to filter the list of symbols
by name. You can use the Recall button to recall a desired Search