Hardware Installation 2
Installation and Operation Guide 21
Install the Bracket and Splitter
The splitter is usually installed on the right side of the oven.
1Place the bracket against the side of the oven. The two notches should be up
and the standoffs should face the center of the oven.
2Use two T-shaped thumbscrews to fasten the bracket to the T-slots in the
oven wall (Figure 7).
NOTE The body of the splitter may be discolored as a result of the deactivation process. This is
not a defect.
Figure 7 Installing the bracket
Thumbscrews
Detail
Bracket