![](/images/backgrounds/108973/108973-204x1.png)
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(1)Hammer
(1)Pliers
(2)7/16" Wrenches
(2)1/2" Wrenches
Lay out and identify parts and hardware using the illustrations on pages 2 and 3.
STEP 1: (SEE FIGURE 1)
•Insert a plug (AA) into the end of the hitch tube (9).
•Attach the hitch bracket (8) to the hitch tube using two 5/16" x
Tighten.
•Install the hitch pin (A) in the hitch bracket and hitch tube and secure it with the hairpin cotter (T).
AA
A G
8
9
I
T
FIGURE 1
STEP 2: (SEE FIGURE 2)
•Attach the hitch support tubes (3), and (4) to the hitch tube using one 1/4" x 2" hex bolt (C) and 1/4" nylock nut (J). Do not tighten completely.
3
J
4
C
FIGURE 2
STEP 3: (SEE FIGURE 3)
•Insert plugs (AA) into the ends of the hopper support tubes (5) and (6).
•Attach hopper support tube (5) and hopper support tube (6) to the hitch support tubes as shown, using two 1/4" x
Do not tighten completely.
AA
5
AA
6
E J
J
E
FIGURE 3
STEP 4: (SEE FIGURE 4)
•Insert the bushing (Y) into the cross brace (7).
•Attach the cross brace to the hopper support tubes using two 1/4" x
Y
7
B
J
J
B
FIGURE 4
4