STEP 9: (SEE FIGURE 9)

Install the grip (BB) onto the flow control arm.

Assemble the adjustable stop (V) to the flow control bracket using the 1/4" x 3/4" carriage bolt (H), nylon washer (N) and wing nut (U).

STEP 11: (SEE FIGURE 11)

Install the end of the flow control rod (10) with no hole into the elongated hole in the flow plate on the bottom of the hopper. Lock the rod in the flow plate by rotating the rod.

BB

U

N

V

H

FIGURE 9

STEP 10: (SEE FIGURE 10)

Attach the flow control bracket to the hitch tube using two 1/4" x 1-3/4" hex bolts (D), four 1/4" washers (M) and two 1/4" nylock nuts (J). Do not tighten completely.

J

M

M

D

FIGURE 10

FIGURE 11

STEP 12: (SEE FIGURE 12)

Swing the flow control rod around and insert the end of the rod into the flow control arm. Secure it with a

1/4" washer (M) and a 3/32" x 3/4" cotter pin (P).

M

P

FIGURE 12

6