Aiphone AX Series 13710 (28 13 00) - 5
2. Press door station CALL button.
3. Calling tone rings on master station (for normal call, intermittent tremolo sound; for priority
call, rapid intermittent tremolo sound) and selector button LED for individual door station
flashes (double-flash for priority call). If door station has camera, video from door station
shall be displayed on master station monitor. Call tone continues to ring until answered or
is timed out (based on setting). You can stop calling tone by pressing OFF button.
4. If you press individual door station selector button, LED stops flashing and stays lit and
you can talk hands-free to that station. If only TALK button is pressed to answer call,
hands-free communication initiates with door station at highest priority call. Talk LED
lights when you talk and goes off as you listen to caller.
5. Press OFF button again to end communication. Call also ends automatically when set talk
limit is reached.
6. If you hold down TALK button for a minimum of 1 second, communication switches to
press-to-talk mode. Hold down TALK button to talk and release to listen to caller. You
cannot switch back from press-to-talk communication to hands-free communication.
7. If other master station presses selector button of in-use door station or in-use master
station, busy signal is heard at master station.
8. Microphone is muted while you hold down privacy button on master station while in
communication.
9. You can connect footswitch and use it the same manner as TALK button.
10. Master station can display calls up to 8 stations at the same time. If there are more than 8
incoming calls, they will be displayed in order of priority and time of call.
11. You can adjust calling tone, transmit volume, and receive volume with volume controls at
bottom of master station.
12. You can use a headset (not included in system) instead of built-in master station’s speaker
and microphone.
D. Calling Master Station from Another Master Station and Communicating:
1. Press individual selector button of master station.
2. Pre-tone sounds both master stations and starts hands-free communication. Talk LED
lights when you talk and goes off as you listen to caller.
3. Press OFF button to end communication. You can end call from either master station.
Call also ends automatically when set communication end time is reached.
4. If called master station has privacy mode set (privacy settings button is lit), communication
is only 1-way, from calling master station to called master station, and nothing can be
heard from called master side. Press TALK button on called master station for a minimum
of 1 second. Press-to-talk communication starts. Hold down TALK button to talk and
release to listen to caller.
5. You cannot call master station while it is communicating. You will hear a busy signal.
E. Privacy (PRIV) Function:
1. To make master into privacy mode (prevent monitoring from other stations), press privacy
button (LED lights up).
2. To cancel privacy mode, press privacy button again (LED goes out).
3. Privacy setting cannot be changed while in communication.
F. CO Line Call from Door Station and Communication:
1. If CALL button is pressed at door station while CO Transfer feature is set (with CO
Transfer button lit), call tone rings on master station (for normal call, intermittent tremolo
sound; for priority call, rapid intermittent tremolo sound) and selector button LED for
individual door station flashes (double-flash for priority call). At same time, telephone call
is placed to programmed CO line number.