Aiphone FK1629 Communication by using the handset, About the priority, Hands-free mode

■Communication by using the handset

<In the hands-free mode>

1)Lift the handset and you can communicate with the handset.

*You can also communicate in the press-to-talk mode by pressing and holding TALK .

2)When you have finished the communication, put the handset on the hook.

Communication will end.

<In the press-to-talk mode>

You can communicate in the press-to-talk mode by pressing and holding TALK even when you are communicating with the handset.

NOTE:

Communication will end automatically according to the set communication time.

About the priority

The order of priority for two or more actions (communication, calling, paging, monitoring, etc.) performed at the same time is as follows depending on the priority setting.

Priority	Setting	Action
1 (high)	[URGENT], [BROADCAST]*1	Communication,
2	[PRIORITY]	calling, paging

3[NORMAL]

4 (low)	-	Monitoring, scan-
		monitoring

*Earlier call has priority over later call if the priority setting is the same. When the communication path is occupied, it is notified by a sound.

*Communication takes priority over calling.

However, when a call with higher priority comes in, the communication will be forcibly stopped.

*1: [BROADCAST]:

This can be selected only when you perform paging. When [BROADCAST] is selected, you can perform paging while interrupting all the other communications of lower priority. In that case, no receiver can answer you.

NOTE:

When communication is stopped by receiving a higher priority operation, a notice sound rings.

22