Aiphone FK1629 Communication in the hands-free mode, Communication in the press-to-talk mode

Answering a call

The maximum duration of communication is preset in the System setting. (It can be set to a maximum of 10 minutes.)

1 Answer the call in one of the following ways.

■Communication in the hands-free mode

(Available when "COMMUNICATION METHOD" is set to "HF" in the "INITIAL SETTING")

<When called in from a door station>

1)Press TALK momentarily.

*1

After a beep, you can communicate in the hands- free mode.

*1: When talking:	(Lit)
When listening to the caller:		(Off)

2)When you have finished the communication, press OFF .

Communication will end.

*You can communicate in the press-to-talk mode by the following operation even when "HF" is set (e.g., when it is noisy around you).

•Press and hold TALK for a few seconds while being called. (Beeps twice and [PRIVACY] disappears from the display.)

•Press and hold TALK for more than one second while communicating. (Beeps once and [PRIVACY] disappears from the display.)

<When you received a direct voice call from another master station>

You can talk back to it. If you press and hold TALK for more than one second, it changes to the press-to-talk mode. (Beeps once and [PRIVACY] disappears from the display.)

■Communication in the press-to-talk mode

(Available when "COMMUNICATION METHOD" is set to "PTT" in the "INITIAL SETTING")

<When called in from a door station>

1)Press TALK momentarily.

After a beep, you can communicate in the press-to- talk mode.

2)Press and hold TALK to talk and release to listen to the caller.

(When talking) (When listening to the caller)

: Lit: Off

3)When you have finished the communication, press OFF .

Communication will end.

<When you received a direct voice call from another master station>

Press and hold TALK to talk with and release to listen to the caller.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

21