5
OPERATION DURING COMMUNICATION AND MONITORING
ZOOM/WIDE switching
1Press the [
ZOOM/WIDE] button when a picture is displayed.
• Switching between [zoom] ⇔ [wide] occurs each time the button is pressed.
[Wide picture] | [Zoom picture] |
NOTES: When the caller is not shown in the center of the picture, the zoom picture can be moved up, down, left, and right. (Refer to section
The wide picture may be distorted in comparison with the zoom picture due to the characteristics of the camera, but this is not a malfunction.
Pan/tilt operation
1When a zoom picture is displayed, press the [], [], [], or []
button.
• []: Up
• []: Down
• []: Left
• []: Right
• Moving diagonally is also possible.
1. The image range of the zoom picture and wide picture differs. The edges of the wide picture do not display with the zoom picture.
2. At night, due to reduced lighting on subjects, subjects may become blurry and difficult to see if the zoom picture is moved up, down, left, or right. (The same thing occurs with moving subjects.)
- 8 -
