Aiphone JAW-AZ manual Wiring Diagram, JA-2MECD, Jaw-Az, JA-2HCD

WIRING DIAGRAM:

JAW-AZ Modulator for Standard CCTV Camera and Audio-only Door Station

			Door 1		JA-2M(E)CD
	JA-DAC/DGC/DGV					Door 1
				A1
						A1
				A2		A2
	JAW-AZ
	MASTER					Door 2
Door 2			A1			A1	JA-2HCD
			A2			A2
JA-D*	AUDIO							SUB IN
1
		1				B1		B1
2			2			B2		B2
	VIDEO IN							SUB OUT

JA-2HCD

SUB IN

B1

B2

SUB OUT

CCTV Camera

75Ohm, 1V Peak-to-peak (Independently powered)

IMPORTANT:

Do not install JAW-AZ/JA-D on Door 1 input.

Sensor input cannot be used when JA-D is present.

			B1
VIDEO OUT			B2
	PS-2420UL
	+	+	+
SENSOR	-	-	-
NC
NC
RELAY
NO
NO

B1

B2

+

-

JAW-AZ

NOTES:

1. JA-D is the only audio-only door

(JA-D cannot be used when JAW-AZ

is connected to C1/C2 inputs.)

MASTER	Adapter 1
A1	C1
A2	C2

AUDIO

1

2

VIDEO IN

	station compatible with this system.
2.	Video Output is optional. If not in
	use, set the 75 ohm switch to the
	ON position.
3.	When the SENSOR input is used,
	the camera will turn on when the
	sensor device is activated.

CCTV Camera

75 Ohm, 1V Peak-to-peak (Independently powered)

Remote Activation**

(Optional, use only when

JA-D is not installed)

VIDEO OUT	When VIDEO OUT is connected,
	set 75 ohm switch to OFF position.

Constant video output for

SENSOR CCTV monitor, DVR, etc.

NC

NC

RELAY	Normally Open contact for
NO
	remote device activation
NO
	(i.e. video switcher, DVR, etc.)

*NOTE: JA-D can only be used when JAW-AZ is on master Door 2 input, and when JP1 is removed.

**Sensor input requires a Normally Closed contact from 3rd party supplied device (motion detector, etc), and cannot be used when

JA-D is present.

Pg. 2