Aiphone JB-2MED Room-to-room communication English, Transfer entrance call English

Room-to-room communication English

1.Press the CALL button once.

2.The "All Call" function is activated to link all of the inside stations.

3.If another person presses the TALK button, handsfree communication is possible.

4.Press and release the TALK button to end.

Do not press the TALK button during communication in step 3. It will end the communication.

NOTES: 1. Room-to-room communication ends automatically after approx. 1 minute.

To have another room-to-room conversation, repeat from step 1.

2.If a call is received from an entrance station during room-to-room communication, a chime tone sounds only at the master station where communication is taking place. Quickly end room-to-room communication, then the system switches to the calling entrance station.

7-7

JB-2MD JB-2MED
1			2
	JB-2MD	JB-2MED
		SET PLAY REC
	CALL	CALL
	MONITOR
TALK	MONITOR	MONITOR
3			4
MONITOR		MONITOR	MONITOR
TALK		TALK	TALK

Transfer entrance call English

1.Press the CALL button during communication with an entrance station.

2.An image of the entrance is displayed on all of the monitor stations.

3.If the transferred station presses the TALK button, room- to-room communication starts.

4.If the transferred station presses the TALK button again, it switches to entrance station calling mode. By pressing the TALK button once more, communication is established with the entrance station. To end, press and release the TALK button.

NOTES: 1. The call-in from the entrance station will be held for 45 seconds. End the room-to-room communication within this timeframe.

2. Communication ends automatically after approx. 1 min.

7-8

JB-2MED

		SET PLAY REC
16-picture, 4-frame mode		16/32/60-picture mode
2 sec.	6 sec.
		2 sec.
10 sec.	14 sec.
01/APR/04 15:30		01/APR/04 15:30
Automatic recording		English

If a call is received from the entrance, the unit starts recording automatically. The REC button lights during recording.

•16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec. and 14 sec. from time of call-in.

•16/32/60-picture mode: Records after approx. 2 sec.

NOTES: 1. The automatic recording function cannot be cancelled.

2.The screen shown when monitoring the entrance is not recorded automatically. If you wish to record this screen, press REC button.

3.When automatic recording has finished, for approx. 15 sec. after the monitor screen goes off, automatic recording will not be activated for the same entrance station even if a call is placed (to prevent prank calls).

7-9

JB-2MED

	MONITOR
	MONITOR
	TALK
	TALK
Manual recording	English

1.Display a video image with the entrance MONITOR button.

2.Press the REC button. The REC button lights and recording starts.

NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame is recorded in manual mode.

2.If manual recording is activated when a call is received from an entrance station, it overwrites

the automatically recorded image.

- 10 -