Aiphone JB-2MED Operations, Setting up English, Answering a door call Voice actuate mode English

Setting up English

1. If the record mode is changed in step 5, the previously recorded screens are deleted. If you do not wish to delete the screens, do not change the record mode.

2. If you only want to change a certain item, or if you made a mistake in the settings, you must go through the entire sequence. Start again from "Mode selection".

3. The setting mode will end automatically after 2-1/2 minutes. If it ends during setting, start again from "Mode selection".

•If the SET button is flashing or is on before starting, turn it off with the following method.

•If it is flashing: Press the PLAY button. When play is complete, press the SET button.

•If it is on: Press the SET button.

1.Mode selection:

Press the SET button for 2 seconds or more to select the setting mode.

2.Setting the position of the date/time display:

Press the PLAY button to move upward, and the REC button to move downward, and set with the SET button.

3.Setting the date/time:

Use the PLAY button (+) and the REC button (-) to adjust the sequence of year _ month _ date _ hour _ minute, and set with the SET button.

4.Setting the alarm time:

Select with the PLAY button to move upward, and the REC button to move downward, and set with the SET button.

5.Setting record mode:

Select the number of pictures to be saved. Press PLAY button tomove upward, and the REC button to move downward. Set with the SET button.

6.End:

Press the TALK button to end the setting process during steps 1 to 5. Otherwise, it will end automatically after 2-1/ 2 minutes.

7 OPERATIONS

7-1

JB-2MD JB-2MED

1 2

3 4

Answering a door call (Voice actuate mode) English

1.The CALL button of the entrance station is pressed.

2.The chime tone sounds, the caller is seen on the video monitor, and the caller's voice is heard.

3.Press the TALK button momentarily, then communicate handsfree. The transmit LED lights when you talk, and goes off as you listen to the caller (or hear outside sounds).

4.Press the TALK button again to end.

NOTES: 1. In step 2, the video and audio go off after approx. 45 seconds. If the TALK button is pressed within approx. 45 sec., it connects to the caller's entrance station.

2.In step 2, the door call-in LED on the JB-2MD and JB-2HD lights in red if called from entrance station 1, and in green if called from entrance station 2.

3.If there is a lot of noise at the entrance station and conversation is difficult, use the MANUAL Push-to-Talk mode.

4.Communication (video) ends automatically after approx. 1 minute. If the TALK button is pressed within approx. 30 sec., it connects again to the caller's entrance station.

5.If a call is received from an entrance station while already responding to another station, a chime tone sounds only at the master station where communication is taking place. Quickly finish communicating with the first calling entrance station. Press the TALK button again to start communication with the other calling entrance station.

6.If it turns to dark in the evening, LEDs in the door station light on automatically.

7-2

JB-2MD JB-2MED

1 2 3

4 5

- 8 -