WIRING DIAGRAM:

JF-DVF-HID

A1

A2

Connect the reader to the host according to the wiring table below and the host installation guide.

Wiegand Wire

Color

+ DC (5-16V)

Red

Ground

Black

Data0

Green

Data1

White

Shield Ground

Drain

Green LED

Orange

Red LED

Brown

Beeper

Yellow

Hold

Blue

Card Present

Violet

JF-2MED

1A1 B1

1A2 B2

2A1

+

-

 

2A2

 

S

S

+

-

PS-1820UL

TESTING AND OPERATION:

When power is applied to the card reader, the LED will flash green three (3) times while the beeper beeps simultaneously. The LED will then turn red. This indicates that the microcontroller is operating properly.

Present an ID card to the reader. (Hold card directly in front of reader.) The LED will momentarily turn green while the beeper beeps once, indicating that the card was read successfully.

SPECIFICATIONS:

CARD READER:

 

CAMERA:

 

Power Source:

5 ~ 16V DC

Camera unit:

CCD Camera

Absolute Max. Voltage:

18V DC

Scanning line:

525 lines

Current Requirements:

30mA (Avg); 75mA (peak)

Min. illumination:

5 Lux at 1' or less

Terminations:

Color-coded pre-wired pigtail

Terminations:

Screw terminals

Wiring Distance:

500'

Operating Temperature: -10°~60°C / 14°~140°F

Operating Temperature: -10°~60°C / 14°~140°F

Wiring Distance:

330' w/871802 wire

Operating Humidity:

0-95% relative humidity

 

980' w/JBW-BA & 851602 wire

 

non-condensing

Dimensions(camera):

5-¾” W x 11-⅝” H x 1-5/16" D

 

 

With SBX-DVF-P:

5-15/16" W x 11-¾” H x 2-13/16" D (Top)

 

 

 

1-15/16" D (Bottom)

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference that may cause undesired operation. For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The Reader is intended to be powered from a limited power source output of a previously certified power supply.

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

TOLL FREE TECHNICAL SUPPORT:

Pg. 2

(425) 455-0510

(800) 692-0200

JF-DVF-HID Instr.

FAX (425) 455-0071

E-MAIL: tech@aiphone.com

0810JD

Page 2
Image 2
Aiphone JF-DVF-HID dimensions Wiring Diagram, Testing and Operation, Specifications, Card Reader Camera, FCC Warning

JF-DVF-HID specifications

The Aiphone JF-DVF-HID is a high-quality, advanced door station designed for enhanced security and communication in residential and commercial settings. This sleek device is a key component of Aiphone’s JF Series, which is renowned for its reliability and innovative technology.

One of the standout features of the JF-DVF-HID is its integration of an HID proximity card reader, which allows for secure access control. This enables users to gain entry by simply presenting a compatible card, streamlining the access process and eliminating the need for traditional keys. This feature is especially valuable in environments that require a higher level of security, such as office buildings or gated communities.

The unit is equipped with a high-resolution camera that delivers clear, color images, ensuring that users can see who is at the door. The wide-angle lens provides a 170-degree field of view, allowing users to monitor a broader area and increasing the chances of identifying visitors. Additionally, the built-in infrared LEDs enable night vision capabilities, ensuring clear visibility even in low-light conditions.

Audio quality is another strong point of the JF-DVF-HID. It features a hands-free communication system, allowing seamless two-way conversations between the door station and internal monitors. This enhances user convenience and security, as individuals can communicate without needing to open the door.

Durability is crucial for any outdoor device, and the JF-DVF-HID does not disappoint. Its weather-resistant design ensures reliable performance despite exposure to the elements. The sturdy construction helps protect against vandalism and ensures longevity, making it an ideal choice for outdoor installations.

Installation and integration are also made easy with the JF-DVF-HID. It is designed to work within Aiphone’s JF Series systems, allowing for easy connectivity with existing monitors and other components. The device operates on a simple two-wire system, reducing installation complexity and costs.

In conclusion, the Aiphone JF-DVF-HID is a multifaceted door station that combines advanced features, quality construction, and user-friendly technology. Its high-resolution camera, integrated HID reader, durable design, and superior audio capabilities make it a top choice for anyone seeking to enhance their security and communication solutions.