Pioneer VSX-D909S manual Specifications, Techno Tidbits & Problem-solving, Amplifier Section

Techno Tidbits & Problem-solving

Specifications

Amplifier Section

Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front).

Continuous Power Output				Ω)
Front	100 W + 100	W (20	Hz-20 kHz, 0.09 %, 8
Center	100	W (20	Hz-20 kHz, 0.09 %, 8	Ω)
Rear	100 W + 100	W (20	Hz-20 kHz, 0.09 %, 8	Ω)

Audio Section

Input (Sensitivity/Impedance)		4.7 mV/47 kΩ
PHONO MM
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD
MD/TAPE 1/CD-R, TAPE 2		335 mV/47 kΩ
Phono Overload level (T.H.D.0.1 %, 1kHz)
PHONO MM		120 mV
Frequency Response
PHONO MM	20 Hz to 20,000 Hz ± 0.3 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD
MD/TAPE 1/CD-R, TAPE 2 ....		5 Hz to 100,000 Hz –3+0dB

Output (Level/Impedance)

VCR 1/DVR REC, VCR 2 REC, MD/TAPE 1/CD-R REC

TAPE 2 REC	335 mV/2.2 kΩ
Tone Control
BASS	± 6 dB (100 Hz)
TREBLE	± 6 dB (10 kHz)
LOUDNESS	+10 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM	80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD
MD/TAPE 1CD-R, TAPE 2	97 dB
MULTI CHANNEL IN	97 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO MM	80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD
MD/TAPE 1/CD-R, TAPE 2	83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers.

**Measured by Audio Spectrum Analyzer.

Video Section

Input (Sensitivity)	1 Vp-p/75 Ω
Output (Level/Impedance)	1 Vp-p/75 Ω
Signal-to-Noise Ratio	55 dB
Frequency Response	5 Hz to 10 MHz –3+0dB

Component Video Section

Input (Sensitivity)	1 Vp-p/75 Ω
Output (Level/Impedance)	1 Vp-p/75 Ω
Signal-to-Noise Ratio	55 dB

FM Tuner Section

Frequency Range		87.5 MHz to 108 MHz
Usable Sensitivity	Mono: 13.2 dBf, IHF (1.3 µV/75 Ω)
50 dB Quieting Sensitivity		Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio		Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion		Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity		60 dB (400 kHz)
Stereo Separation		40 dB (1 kHz)
Frequency Response		30 Hz to 15 kHz (± 1) dB
Antenna Input		75 Ω unbalanced

AM Tuner Section

Frequency Range	530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna)	350 µV/m
Selectivity	25 dB
Signal-to-Noise Ratio	50 dB
Antenna	Loop antenna

Miscellaneous

Power Requirements	.............................		AC 120 V, 60 Hz
Power Consumption			400 W, 550 VA
Power Consumption in Standby mode			.................. 1.0 W
AC Outlet
SWITCHED (×2)		Total 100 W (0.8 A) MAX
UNSWITCHED		100 W (0.8 A) MAX
Dimensions	420 (W) × 173 (H) × 470 (D) mm
(16-9/16 (W) × 6-13/16 (H) × 18-1/2 (D) in.)
Weight (without package)		14.4 kg (31 lb 13 oz)

Furnished Parts
FM wire Antenna	1
AM loop Antenna	1
“AA” IEC LR6 batteries	2
Remote Control Unit	1
Operating Instructions	1

NOTE:

Specifications and the design are subject to possible modifications without notice, due to improvements.

89