Pioneer VSX-D909S manual MULTI-ROOM set up, Press System Setup on the remote control

Using Other Functions

MULTI-ROOM set up

After you have completed the necessary connections for MULTI-ROOM operation you need to set up the receiver for such operation. Follow the instructions below. The page after this one explains how to use the MULTI-ROOM function once it's been set up.

2,6

ë￿		USE	SETUP
S0URCE			RECEIVER
	MULTI	SYSTEM
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2
	MULTI CONTROL
CD	MD/	TUNER	TVCONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +
1 Á￿		4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE	0		EXIT
			ENTER
+10			DISC
+	TV		+
TV VOL	TV CONTROL		VOLUME
–	TV FUNC		–
REMOTE SETUP
INPUT	MENU		MUTE
ATT

SYSTEM SETUP
EFFECT/	+	FUNCTION
CH SEL

ENTER

DIGITAL	–		SIGNAL
NR			SELECT
MIDNIGHT	MULTI CH	DSP	STEREO/
	INPUT		DIRECT
			/DTS
LIGHT		ADVANCED	STANDARD

1

3,4

5,6

1 Set the slide switch to SETUP.

Also make sure that the TV is on and set to the receiver.

2 Press SYSTEM SETUP on the remote control.

The REMOTE SETUP MENU appears on your TV screen. You can escape from this screen at any time by pressing SYSTEM SETUP again.

Multi-Room
Volume Level			￿￿
[	VARIABLE	]
IR Receiver
[PIONEER] ￿
[EXIT]

CAUTION : If the "FIXED" position is chosen, the volume will be loud.

3Use the 5´° buttons to select the MULTI-

ROOM set up mode and press ENTER.

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

CAUTION!

If the MULTI ROOM is set to FIXED the volume on the main unit will be set to maximum. Thus, when output, it will be extremely loud. Please set the master volume controls of the integrated amplifier in the sub room very low at first and experiment to find a suitable volume.

4 Select the VOLUME LEVEL by using the 2´3 buttons.

If you hook up a just a power amplifier in the sub room the receiver will act as a pre-amp. In this case choose VARIABLE for the VOLUME LEVEL setting. If you hook up a full integrated amplifier in the sub room (such as another Pioneer VSX receiv- er) choose FIXED for the VOLUME LEVEL setting.

5Select the IR RECEIVER type with the 5´° buttons and select the type by using the

2´3 buttons.

If you have the Pioneer-made MR-100 select PIONEER. If you have an IR RECEIVER from a different company, select

OTHERS.

OPERATION

memo

Some IR RECEIVERS may not work with this system, check with a Pioneer representative to be sure.

6Move to the EXIT setting and press ENTER to exit MULTI-ROOM set up and return to

the SYSTEM SETUP MENU operations.

You can leave the MULTI ROOM set up mode any time by pressing the SYSTEM SETUP button.

•When you're done setting up, remember to set the slide switch back to USE.

79