Pioneer VSX-D909S manual Using Other Functions, Recording from Audio Components, Operation

Using Other Functions

Recording from Audio Components

The following explanations show you how to record an analog or digital audio signal. Note that your analog components cannot record a player that is only connected digitally (and vice-versa). If you want to record from a digital component to an analog one (for example, a tape deck), or vice-versa, the digital component it must be connected via analog jacks and you need to set the SIGNAL SELECT switch to ANALOG. To make exact digital copies (of digital sources like CDs) both the source component and the recorder must be connected with digital connections. See p.12 for more on analog audio connections and p.13 for digital audio connections.

The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS and surround memo effects have no effect on the recorded signal and the MULTI CH IN cannot be recorded.

In some cases, digital recordings have copy guard protections and making a digital copy is not possible. In this case you can only copy them in an analog manner.

ë￿		USE	SETUP	1	Select the source component. Set SIGNAL
S0URCE			RECEIVER
	MULTI	SYSTEM			SELECT according to the source
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2	1
CD	MULTI CONTROL		TVCONT		component's signal (ANALOG or DIGITAL).
	TAPE1	TUNER
	MD/
CLASS	MPX	BAND	DIRECT ACCESS

¦￿ 7 3 8

- TUNING +		- STATION +
1 Á￿ 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2	3
4	5	6
7	8	9
GUIDE	0	EXIT
		ENTER
+10		DISC

Press the SIGNAL SELECT button on the remote control (or use the button on the front panel) and choose ANALOG.

2Start recording with a recorder.

3Playback the source to be recorded.

+	TV		+
TV VOL	TV CONTROL		VOLUME		Record monitor (TAPE 2 MONITOR)
–	TV FUNC		–
REMOTE SETUP					If you connect a cassette deck with a record monitor function to the
ATT
INPUT	MENU		MUTE
SYSTEM SETUP	+				TAPE 2 MONITOR jacks, you can listen to the sound of an analog
CH SEL			FUNCTION
EFFECT/
	ENTER			1	recording as it is being recorded.
NR	–		SELECT		Press TAPE 2 MONITOR to switch between the sound of the
DIGITAL			SIGNAL
MIDNIGHT	INPUT	DSP	DIRECT		recording (TAPE 2 indicator on) and the sound of the source
	MULTI CH		STEREO/
			/DTS		component (TAPE 2 indicator off).
LIGHT	ADVANCED		STANDARD
					VSX-D909SDigital Signal Processor
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
					DOWN	UP
					TAPE 2 MONITOR

OPERATION

69