Pioneer VSX-D909S manual Preparation, Displays & Controls

Displays & Controls

Display

All the display information is explained and/or referenced here.

1	2 3 4		5	6	7	8	9		10	11		12		13
	SIGNAL ATT						DSP
		LOUDNESS			MIDNIGHT			STEREO					VOLUME
											PRO LOGIC
	SELECT OVER		H.P

ANALOG SP			AB	DIGITAL
DIGITAL		MONO STEREO		dB
AUTO		TUNED AMFM		TAPE 2
AC-3DTS
L	C	R	LFE
LS	S	RS

PREPARATION

15

1SIGNAL SELECT indicators

Light to indicate the input signal you selected.

ANALOG : Lights when analog signals are assigned.

DIGITAL: Lights when digital audio signals are selected.

AUTO: Lights when the receiver is set to select the input signal automatically.

2 Program Format indicators

AC-3:Lights when a source with Dolby Digital signals is played.

DTS: Lights when a source with DTS audio signals is played.

For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source.

L – Left front channel. C – Center channel.

R – Right front channel.

LS – Left surround channel. S – Surround channel (mono). RS – Right surround channel.

LFE – Low Frequency Effects channel.

3 Analog level indicators

OVER – When the source signal is analog, this lights if the signal is in danger of distorting. Press INPUT ATT on the remote control to lower the signal level.

ATT – Lights when INPUT ATT is used to reduce the level of the analog source signal.

14

7MIDNIGHT indicator (See p.49)

Lights when the MIDNIGHT LISTENING mode is on.

8DSP indicator (See p.41-45, 47)

Light when a DSP or Advanced Theater mode is selected.

9STEREO indicator

Lights when a STEREO mode is selected.

10Radio Frequency/Function indicator

Displays the function or the frequency of the current radio station.

112/dts mode indicators

2DIGITAL : When the 2/dts mode on the

receiver is on, this indicator lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital.

2PRO LOGIC: When the 2/dts mode on the receiver is on, this indicator lights during 2 channel playback.

DTS : When the 2/dts mode on the receiver is on, this indicator lights to indicate playback of a DTS signal.

12 MASTER VOLUME indication

Displays current volume level.

13 TAPE 2 indicator

Lights when the TAPE 2 monitor is on.

4Speaker indicators

Light to indicate the current speaker system, A and/or B.

5LOUDNESS indicator (See p.49)

Lights when the LOUDNESS mode is on.

6H.P (headphones)

Lights when headphones are connected to the PHONES jack (speakers systems A and B both turn off automatically).

14 Character display

Shows current mode, status, etc.

15 Tuner indicators

MONO: Lights when the tuner is set to receive FM broadcasts and when selected MPX mode. STEREO: Lights when a FM stereo broadcast is received in the auto stereo mode.

TUNED: Lights when a broadcast is received.

AM/FM: Light to indicate the current band (FM or AM).

25