Pioneer VSX-D909S manual Setting Up the Direct Function, Using the System Off Button, Setup

Using Other Functions

Using the System Off Button

This button will turn off the receiver and any component that has programmed into the SYSTEM OFF settings (see above) as well as turn off all PIONEER components regardless of whether they have been programmed into SYSTEM OFF. If you use this feature when a DVD is playing, the player will stop the play mode before switching off.

ë￿	USE	SETUP
S0URCE		RECEIVER
MULTI	SYSTEM
OPERATION	OFF

DVD/LD TV/SAT VCR1 VCR2

MULTI CONTROL

MD/

CD TAPE1 TUNER TVCONT

11 Set the remote control slide switch to USE.

22 Press the SYSTEM OFF button on the remote control.

Setting Up the Direct Function

The DIRECT FUNCTION is designed in case you have an external video source connected to your TV (a video source that is not going through the receiver). For this explanation we'll call this the "external video deck." You'd like to control the external video deck with this unit's remote control so you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the receiver. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video deck with the remote but the receiver does not go into VCR 2 mode.

S0URCE	USE	RECEIVER	1	1	Set the remote control slide switch to
ë￿		SETUP
MULTI	SYSTEM				SETUP.
OPERATION	OFF

DVD/LD	TV/SAT	VCR1	VCR2	3	Also make sure that your TV is on and set to the receiver.
	MD/
	MULTI CONTROL
CD	TAPE1	TUNER	TVCONT
CLASS	MPX	BAND	DIRECT ACCESS

4

2

¦￿	7	3 8
- TUNING +		- STATION +
1 Á￿ 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2	3
4	5	6
7	8	9
GUIDE	0	EXIT
		ENTER
+10		DISC

2Press the REMOTE SETUP (INPUT ATT) button and 4 at the same time to select

the DIRECT FUNCTION mode.

The MULTI CONTROL buttons DVD/LD, TV/SAT, VCR 1, VCR 2, CD, and MD/TAPE 1 start to blink.

2,5

+ TV+

TV VOL TV CONTROL VOLUME Direct Function

–	TV FUNC	–	You can choose whether
			the commander sends a
			function code or not ,
REMOTE SETUP			when you press each
INPUT	MENU	MUTE
ATT			Multi-control button.
SYSTEM SETUP			1Select function.
EFFECT/	+	FUNCTION
CH SEL			2Input YES or NO.
	ENTER		TRANSMIT	YES =1
DIGITAL	–	SIGNAL		NO =2
NR		SELECT	EXIT = Remote Setup

MIDNIGHT	MULTI CH	DSP	STEREO/
	INPUT		DIRECT
			/DTS
LIGHT		ADVANCED	STANDARD

3 Select a component by pressing its MULTI CONTROL button.

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

4Set the DIRECT FUNCTION of each external source to NO by pressing 2 .

5Press the REMOTE SETUP button to exit the DIRECT FUNCTION mode.

•When you're done setting up, remember to set the slide switch back to USE.

memo	The default setting is all YES. If you have turned a DIRECT
	FUNCTION to NO and want to turn it back to YES, follow
	the directions above and press 1 in step 3.

74