Pioneer VSX-D909S Installing the Receiver, Opening the Front Panel, Preparation, Before You Start

Before You Start

Operating range of remote control unit

The area in which you can use the remote control to operate the VSX-D909S is fairly large. To use, point the remote control toward the remote sensor on the front panel of this unit while within the range shown right.

Remote control may not function properly if:

•There are obstacles between the remote control and the remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver located near a device emitting infrared rays.

•Operated simultaneously with another remote control which uses infrared rays.

Installing the Receiver

30°

30°

23 feet (7m)

PREPARATION

Please note:
• Do not place objects directly on top of this unit. This would	8 inches (20 cm)
prevent proper heat dispersal.
• When installing in a rack, shelf, etc., be sure to leave more
than 8 inches of space above the receiver.
		Receiver

Opening the Front Panel

To open the front panel push gently on the lower third of the panel with your finger.

11