Setup Mode
Setup is required only if you need to change a setting or view information.
To activate Set-Up Mode:
1.Press any button to activate computer.
2.Wave a magnet along the right side of the Spinning® Computer until the display window shows all LCD segments flash.
3.Press Toggle (right) button to scroll through available
4.Press the Light (left) button to change settings on the current display option.
Setup mode options:
GEAR and Software Version - Gear Ratio, Select 1 (2.875) for V Bike models or 2 (3.250) for all other models.
• Units - Miles or KM
5
