Star Trac Bike Computer manual Installation Procedure V Bikes, Time required, Parts required

Installation Procedure V Bikes

Time required:

•15 Minutes

Parts required:

•727-0083 Spinning® Computer Kit NOTE: The thick insert is used on the V bikes

Tools required:

•

•

M5 Allen Wrench

M2 Allen Wrench

4. Place the thick insert inside the bottom part of the Mounting Bracket Clamp. Then position the mounting bracket onto the center-curved portion of the handlebars. Once positioned correctly, tighten the 4 M6x20 screws using the M5 Allen tool.

5. Install the computer onto the mounting bracket by sliding the computer clamp over the long portion of the bracket. Tighten computer clamp with the M6 screw and nut using the M5 Allen tool.

11