Aiphone LE-SS-1G warranty Wiring Diagrams, Operation

Models: LE-SS-1G

1 2
Download 2 pages 17.04 Kb
Page 2
Image 2
OPERATION:

WIRING DIAGRAMS:

MP-S/AP-M SYSTEMS:

MP-S/AP-M

1

(2)

(3)

PS-1225UL

E

(MP-S only)

 

 

+

 

+

-

 

 

-

 

 

2 conductor

LE-SS-1G

shielded wire

Red

Blk

Jumper Blue & Black

Blu

wires together.

WIRE COLOR CODE DEFINITIONS:

Red: + side of speaker & call switch, connect to # of master

Black: Common communication, connect to E of master

Blue: - side of call switch

Intercom wiring must be run at least 20" away from any AC wiring, fluorescent lighting, dimmer switches, or any other electronic device that may cause interference.

OPERATION:

1.To place a call from the remote station: Press call button once, then release and wait for a response from the person at the master station. The call tone will be heard at the master for the duration of time the call button being pressed. The LED will be lit for approximately 20 seconds.

2.To answer the call at the master station: Press the channel selector button with the lit LED, which indicates which remote has called in. Press TALK button to talk, release to listen.

NOTE: On LEM-1 master, just push TALK button. There is not a channel selector button on that model.

3.Speak hands free at the remote station.

4.To conclude the call, press the OFF button.

5.To initiate a call from the master station to the remote, simply press the channel selector button, then TALK to speak to the person at the remote.

6.Press OFF to conclude the call.

SPECIFICATIONS:

 

Power Source:

Supplied by master station

Speaker:

20 ohms, 4W, 1.92" square, water proof and puncture resistant, 0.44 oz. magnet

Call Button:

SPST call button. Call tone rings at master as long as button is held down. LED will

 

remain lit for approx. 20 seconds (LEF, LEM-3, MP-3S, AP-5/10M only). Call tone

 

only on LEM-1DL, LEM-1, and MP-1S. Limited stop button.

Communication:

Hands free at sub. Master is push-to-talk,release-to-listen.

Faceplate:

12 gauge stainless steel

Mounting:

Flush mount into a 1-gang box. Surface mount into SBX-1G, sold separately.

 

Tamper proof screws included (6x32 for use with flush gang box) with T-10 TORX

 

bit. Use hardware included with SBX-1G when installing sub into that unit.

Terminations:

Color-coded prewired pigtails

Operating Temperature:

Speaker rating: -67°F to 185°F (-55° to 85°C)

 

Switch rating: -40 F to 257°F (-40°C to 125°C)

Wiring:

2 conductors in a 1-master LEF and MP-S system. 3 conductors in a multi-master

 

LEF system. Shielded cable is recommended. Use Aiphone #822202 for LEM, MP-S,

 

and AP-M. Use #822202 or #822203 for LEF.

Wiring Distance:

See system that unit is being used with for distance specifications.

Dimensions (H x W x D):

LE-SS-1G alone: 4-1/2" x 2-3/4" x 1-5/8"

 

With SBX-1G: 4-9/16" x 2-15/16" x 2-7/8" (Top) 2-1/8" (Bottom)

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425)455-0510 FAX (425) 455-0071

Toll Free Technical Support:

1-800-692-0200

E-mail tech@aiphone.com

LE-SS-1G Instr. 1011JD

Page 2
Image 2
Aiphone LE-SS-1G warranty Wiring Diagrams, Operation