![LEM-1DL Supplemental Instructions](/images/new-backgrounds/50856/508561x1.webp)
#90111 1109
LEM-1DL Supplemental Instructions
Single Master Station with Door Release
-REFER TO INSTALLATION MANUAL INSIDE
The
MASTER STATION:
DOOR STATIONS: (Note: Door stations are weather resistant, made for outdoor use)
Surface mount, plastic door station (included with | |
Flush mount in | |
Vandal resistant flush mount in | |
Vandal resistant flush mount sub in | |
Vandal resistant, red mushroom button, flush mount in | |
| stainless steel |
Vandal resistant flush mount sub in |
OPTIONAL COMPONENTS & ACCESSORIES:
External signaling relay (Requires 12VDC power supply) | |
Dual master adaptor kit | |
| (1 per 2 master stations. Use 2 |
Surface mount box for | |
Surface mount box for | |
Surface mount box for | |
Door strike (for interior wood frame doors only) | |
AC 12V Transformer (used for door strike and for each master station) | |
12V DC Power Supply, 2.5A, UL Listed | |
822202: | 2 conductor, 22AWG, Shielded wire |
| (Available in 500’ and 1000’ boxes) |
| Install two separate runs of this cable, one for the intercom and one for |
| the door release. |
LEM-1DL
(2 component modules per kit)
DOOR RELEASE WIRES MUST BE IN A SEPARATELY JACKETED CABLE FROM THE INTERCOM WIRING.
LEM-1DLS Set contains:
LE-D 1 LEM-1DL, 1 LE-D, 1 PT-1210N.
Door strike not included.
2 cond. shielded for intercom
|
|
| Power |
|
|
| |
Separate 2 conductor for door release |
|
| Source |
|
| for Strike | |
|
|
! | If using a | |
source for door release mechanism. | ||
|
Pg. 1