Air-O-Swiss AOS 2055 manual Operating 2055D, B C D E A, C D E F H G A B

Water quality maintenance

An Ionic Silver Stick© (26) keeps the water free of harmful bacteria. The anti-microbial action of silver is used. The Ionic Silver Stick releases silver ions in the water over a long period (approx. one year). It‘s self-regulating and maintenance-free. Look at picture 26 for the position of the ISS in the base part of the unit. Switch off the unit first. Contact your local retailer or check our website www.air- o-swiss.com for reorder information.

26

Lifecycle indicator

Your appliance comes with a standard lifecycle indicator on the back of the upper part for changing the Ionic Silver Stick®. To remind yourself of when you put the ISS into operation, please cross the current month on the indica­ tor and write the current year on the line provided.

Operating 2055

B C D E

A

A) Rotary switch

Connect the appliance to the outlet and turn rotary switch A to position C or D as required. To switch the appliance off, turn the rotary switch to position B.

B) Switching on/off

If the rotary switch is in position B, the appliance is swit­ ched off.

C) Normal mode

If you select position C, then normal mode is set, and the appliance reaches maximum humidity output.

D) Night mode

If you turn the rotary switch to position D, the appliance works in night mode and is especially quiet.

E) Operating light

The green light (LED) (F) illuminates when the appliance is switched on.

Operating 2055D en

C D E F

H

G A B

A) Switching on/off

Turn rotary switch A from the OFF position to position H or G as required. Position H is especially quiet (night mode). Position G (normal mode) achieves maximum humidity output.As soon as the appliance is switched on, the display shows the current relative air humidity. The measurement is accurate to +/- 5%.

B) Setting the humidity output

The appliance is fitted with a hygrostat. This measures the relative air humidity and automatically switches the appliance off when the desired value is reached. When switching the unit on use the rotary switch (A), the desired value is preset to 55%.

The desired value can be adjusted in steps of 5% by pres­ sing button B. While selecting the humidity output, the desired value is blinking. The word DESIRED appears on the display (E). The setting for the relative humidity ranges from a minimum of 30% to a maximum of 70%. CO means continuous use. A relative humidity of between 40 and 60% is recommended. After a few seconds, the display

11