en | automatically changes to show the current value (CUR |
| RENT) (E). Upon reaching the desired relative humidity, the |
| unit automatically switches off (display shows DESIRED |
| and CURRENT) (E). If the desired relative humidity falls, the |
| |
| appliance automatically switches on again. |
| Quick display of current relative humidity |
| When the unit is switched off (mains cable is connected, |
| rotary switch to OFF setting), the current relative humidity |
| can be shown in the display by briefly pressing one of the |
| B buttons. This display automatically disappears after a few |
| seconds. |
| C) Change Ionic Silver Stick® |
| The letter C in the display indicates that the Ionic Silver |
| Stick® (ISS) must be changed. The symbol remains visible |
| until both B buttons are pressed and held down for approx. |
| 5 seconds. |
| D) Cleaning the appliance |
| The letter D in the display indicates that the appliance must |
| be cleaned. The letter remains visible until both B buttons |
| are pressed and held down for approx. 5 seconds. |
| E) Current/Desired Display |
| If DESIRED appears on the display, the value in % next to it |
| signifies the desired relative humidity, i.e. the desired value |
| is shown. If the display shows CURRENT, then the current |
| relative humidity is shown. |
| F) Automatic |
| “Tank empty” |
| The water level is easy to see thanks to the transparent |
| water tank. The display on the appliance also shows when |
| the unit should be refilled with water. If the water level falls |
| below the minimum quantity, the appliance automatically |
| switches off. A red blinking symbol (F) appears on the dis |
| play. When water is added, symbol F disappears and the |
| appliance continues operating. |
Warning: When lifting the upper part off the base, the ap pliance also switches off. In this case, the red blinking F symbol will also appear on the display. Only when the upper part is replaced on the base does symbol F disappear and the appliance continues operating.
Cleaning/maintenance
Switch the appliance off and remove the power plug from the outlet before you clean the appli ance (27).
•Regular cleaning is a precondition for hygienic, trouble- free operation.
•The appliance can be disassembled for cleaning in a few moves.
•Never submerge the entire unit in water (29).
•The unit must be completely emptied and cleaned, if it has been filled with water for longer than a week without being used.
Recommended cleaning intervals
The recommended cleaning intervals depend on the air and water quality, as well as operating times. A thin film of lime scale on the discs actually increases the humidity output!
•once to twice a year: upper part of housing and fan
•every 2 weeks: water tank and base
•every 4 weeks: humidifying discs
Cleaning the upper part of the housing
Remove the upper part of the unit (31) and wipe out tho roughly once to twice a year with a damp cleaning cloth (32).
Cleaning the fan
The cover can be removed from the upper part of the unit (33). Under this cover is the fan (34), which can be cleaned with a damp cleaning cloth as required.
12