Installing and

Connecting

Plug power cord to the nearest outlet.

Make sure the surface is dry (never place Airfree on wet fl oor or immerge in water) Make sure side blue led is on.

Switch on dimmer (Available in Airfree P125,P80,P60) and the anti-stress light should glow from the top lid (1). After 10 minutes the top lid should be warm.

Place Airfree on the fl oor. Do not install it under furniture or shelves, behind curtains as it will reduce air fl ow and Airfree effi ciency in reducing microorganisms.

Place each Airfree in rooms up to 550 sq. ft. (51 m²) for P125 or 340 sq. ft. (32 m²) for P80 and 258 sq. ft. (24m²) for P60. For larger rooms use proportionally additional Airfree units. The use of just one Airfree in rooms larger than recommended will reduce Airfree effi ciency.

Airfree must be continuously on in the same room, 24 hours a day.

Airfree can only be used in rooms with minimum air volume of 330 cu. ft. (10 m3), free of obstacles.

Airfree can be installed in rooms equipped with air conditioning and heating systems. However it is recommended not to place Airfree nearby them to avoid potential interference in Airfree air fl ow.

Do not place Airfree in the corridor to try to reach the whole house. In this case Airfree will only reduce air pollution in the corridor area.

Airfree is designed for indoors in rooms with their windows and doors rea- sonable closed. However opening up windows in the morning for ventilation will not affect Airfree’s efficiency. Airfree is to be placed away from windows and doors to avoid sterilized air to exit the room.

11

Page 13
Image 13
Airfree P125, P60 instruction manual Installing Connecting