Section 1
This Quick Installation Guide only provides basic instructions. For more detailed information, please refer to the User’s Manual in the supplied CD.
Getting Started
Please refer to the following diagrams to determine which operating mode you should use for your network.
If you want to use the AP431W as an Access Point with minimal configuration, just connect it to your existing router or switch with a Cat. 5 network cable and then power it on. The Access Point is ready to use with its default settings:
SSID: default
Channel: 6
Encryption: disabled
If you want to configure the Access Point’s settings or set it to other operating modes, please follow the rest of this guide.
