Airlink101 AIC1620W user manual Basic Setup, Basic System, Indication LED

CHAPTER 4

USING WEB CONFIGURATION

You can access and manage the camera through the Web browser and the provided software application SkyIPCam UltraView. This chapter describes the Web Configuration, and guides you through the configuration of the camera by using the web browser.

To open the Web Configuration page, please refer to Chapter 3.2, Viewing Image via Your Camera.

After you entered into the Web Configuration of the camera, click Setup on the main page. The Web Configuration will start from the Basic page.

4.1 Basic Setup

The Basic menu contains three sub-menus that provide the system settings for the camera, such as the Camera Name, Location, Date & Time, and User management.

Basic >> System

￿Basic

-Camera Name: Enter a descriptive name for the camera.

-Location: Enter a descriptive name for the location used by the camera.

￿Indication LED

This item allows you to set the LED illumination as desired. The available options include: Normal, OFF, and Dummy. You can select OFF to turn off the camera’s LED signal in order to make it less noticeable, or you can select Dummy to leave the Link LED be on even when it is not connected to the network.

- 19 -