-
38
-
Event Configuration >> Schedule Trigger
You can configure the schedule for trigger function of the camera individuall y by Email, FTP, and NAS.
Select the Enable option on each item, and then select a Schedule Profile f rom the pull-down list and
set the Interval time.
Event Configuration >> GPIO Trigger
This feature needs to be configured if you attach a device with GPIO interface to the camera (i.e. alarm
system)
GPIO Trigger: Check the Enable option to enable the GPIO trigger function of the camera, so that
you can set Trigger Out function or send captured images within the detecting area to the FTP server,
email receiver, Network Storage server, or send an instant message. You hav e to configure
corresponding settings, such as FTP server and email server, to enable this f eature.