1.Insert the Boot ROM into the socket on the Adapter.
2.Refer to the installation procedures provided by the network operating system.
Troubleshooting
If you experience any problems with the Adapter, first verify that the appropriate driver is loaded, that the proper grade of cable is employed for the network connection, and that the supporting hub is functioning properly.
1.Verify that the Adapter is fully and firmly seated in the slot connector.
2.Check the length and rating of the connecting cables.
3.Verify that the Adapter's PCI slot is not deactivated at the BIOS level. The CMOS Setup utility of the computer ordinarily provides the option to activate or deactivate PCI slots.
4.Replace the Adapter in question with a verified Adapter and run RSET8139.EXE diagnostic tests from the \DIAG\ folder of the floppy disk.
5.Install the Adapter to another PCI computer and run the tests again.
Remove all other PCI adapters from the computer and run the tests again. If the verification/diagnostic
8
