Airlink101 ASW208 manual Specifications, Technical Support

Section 3

Hardware Installation

•Place the Switch on a smooth surface

•Connect the output of power cord to the power port of the Switch

•Connect your network device (Switch, Router, or PC) to one port of the Switch using Category 5 or 6 UTP/STP cabling

•Connect another network device to another port of the Switch

Note: The cable distance between the Switch and a network device should not exceed 100 meter. To reliably operate your network at 100Mbps, you must use an Unshielded/Shielded Twisted-Pair (UTP/STP) Category 5 cable, or better Data Grade cabling. While a Category 3 or 4 cable may initially seem to work, it will soon cause data loss.

All kinds of IEEE802.3 compatible network device can connect to the Switch by using straight-through wires or crossover wires because of Switch’s auto MDIX function.

Access Method

•CSMA/CD

LED indicators

•Power (per unit)

•Link/Activity (per port)

Dimension

•131mm(L) x 71mm(W) x 28mm(H)

Temperature

•Operating: 0° ~ 50°, Storage : - 20° ~ 70°

Humidity

•Operating: 10% ~ 90% RH, Storage: 5% to 90% RH

Power

•Input: 100-240V AC, 50~60Hz

•Output: DC 9V / 700mA

Certifications

•FCC, CE

Warranty

•1-Year Limited Warranty

Section 4

Specifications

Standard

•IEEE802.3 10Base-T Ethernet

•IEEE802.3u 100Base-TX Fast Ethernet

Network Media

•100Base-TX – UTP/STP category 5 cable

•10Base-T – UTP/STP category 3 or 5 cable

Connectors

•8 RJ-45 ports for 10/100Mbps TX

Forwarding Method

•Store and Forward

MAC Address Table

•1K

Buffer Memory Size

•768K bits

Section 5

Technical Support

E-mail:support@airlink101.com

Toll Free: 1-888-746-3238

Website: www.airlink101.com

*Actual throughput will vary. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Photos of product may not reflect actual content. Copyright ©2009 Airlink101®