PoE Max
On: When the remaining system power is less than or equal to 7.5 watt, this LED will light, and no more power will be provided to additional PoE devices.
Off: When the system has power over 7.5 watt.
For example: When the total power consumption is 25 watt, the PoE Max LED will light because the remaining power is less than 7.5 watt. If another PoE device is connected, the system will not provide power to the additional PoE device.
Priority: This function protects the Switch when the system power is over loaded. The Switch will disable PoE function to the lower priority PoE ports to maintain the power requirement of the PoE port with a higher priority. When the shared power resource is over 30 watt, the system will automatically distribute power according to the priority status of each port. The lower port number has higher priority than the higher port number, Port 1 > Port 2 > Port 3 > Port 4.
For example: Port 2 is using 7 watt and Port 3 is using 15.4 watt for a combined usage of 22.4 watt. If you connect an additional PoE device to Port 1 with 15.4 watt requirement, the shared power resource would be over 30 watt and the priority function would be activated. Since Port 1 has the highest priority, it will have 15.4 watt, Port 2 will have 7 watt, and the system will cut off power to Port 3 due to overcurrent.
Section 3
Specifications
Physical and Environmental
DC inputs: 48VDC/0.8A
Power Consumption:
•6.3 watt (max. no PoE device connected)
•36.3 watt (max. with 30W PoE device connected) Temperature: Operating: 0° ~ 40° C, Storage:
EMI: FCC Class B, CE Mark Class B
Safety: cUL(UL60950), CB(IEC60950)
General
Standards:
•IEEE 802.3
•IEEE 802.3u
•IEEE 802.3x Full Duplex Flow Control
•IEEE 802.3af Power over Ethernet Protocol: CSMA/CD
Data Transfer Rate:
•Ethernet: 10Mbps (half duplex), 20Mbps
•Fast Ethernet: 100Mbps (half duplex), 200Mbps
Network Cables:
•
•
Number of Ports:
•4 × 10/100
•4 × 10/100Mbps
PoE Power on
•Power+: ping 3 & ping 6
•
Performance
RAM Buffer: 96K bytes per device
Filtering Address Table: 1K entries per device
Packet Filtering/Forwarding Rate:
•10Mbps Ethernet: 14,880/pps
•100Mbps Fast Ethernet: 148,800/pps MAC Address Learning: Automatic update Transmits Method:
Section 4
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
*Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Copyright ©2006 Airlink101™