Manuals / Airlink101 / Computer Equipment / Network Card

Airlink101 AWLH5025 user manual Click Next to accept the default destination folder

Models: AWLH5025

1 29

Download 29 pages 55.01 Kb

Page 6

Step 5 Click Next to accept the default destination folder.

Step 5 Click Next to accept the default destination folder.

Step 6 Click Continue Anyway at the Windows Logo Screen.

(For Windows 2000, click Yes at the Digital Signature Not Found prompt).

6

Image 6

Contents

Ver. 1A MIMO XR 802.11g PCI AdapterModel # AWLH5025 User’s Manual Table of Contents 1.1 Package Contents 1. Introduction2. Installation 2.1 Install Driver & UtilityNote Be sure to turn off your computer before inserting the Adapter Step 4 Click Next at the welcome screen Step 5 Click Next to accept the default destination folder Step 6 Click Continue Anyway at the Windows Logo ScreenFor Windows 2000, click Yes at the Digital Signature Not Found prompt Page 2.2 Verify Driver Installation Page 3. Configure the Wireless PCI Adapter Note to Windows XP UsersPage Page Page Step 7 Go to the Link Information tab and click on the More button 4. Configure the Wireless Utility 4.1 Link InformationPage 4.2 AP List 4.3 Configure Encryption Settings For WEP Settings Step 3 Verify the Network Name SSID is correct and click NextWEP Step 6 Click Complete to finish the settings For WPA Settings WPA Step 5 Enter the WPA Key passphrase and click NextWPA Step 6 Click Complete to finish the settings 4.4 Profile Setting To add a new profile, follow the steps belowStep 1 Click on the Add button Step 2 Enter a name for your new profile and click Next Step 4 Configure any encryption setting if required and click Next Step 5 Click Complete to finish the profile settingStep 6 Your new profile will be listed in the Profile List 4.5 Static IP Setting 4.6 About Technical Support Toll FreeE-mail support@airlink101.com