![](/images/new-backgrounds/1306773/30677341x1.webp)
Click on Change to configure the settings.
Channel: select the channel you want to use.
Basic Rate: select the applicable transfer rate.
Tx Rate: select from Auto to 54 Mbps.
SSID: enter the desired SSID for the access point.
Hide SSID (check box): check to disable the broadcast of SSID.
Tx Power: select the transmission signal power.
Click Apply to submit the changes.
Bridge Adapter: If you have another Ethernet card installed in your computer, you can select the other Ethernet card as the bridge adapter. This will allow any wireless client that is connected to the access point to be bridged to the wired network that the other Ethernet card is connected to.
21