SETTING THE CLOCK

 

RADIO OPERATION

To turn the unit on

You can turn the unit on by pressing any button on the front panel except OPEN and the Jog Dial.

1 With the unit on, press and hold SELECT for more than 2 seconds until the clock indication appears.

1 Press FUNCTION repeatedly to select the band from among F1 (FM1), F2 (FM2), F3 (FM3), A1 (AM1) and A2 (AM2).

The band indications appear cyclically in order.

F1, F2 and F3 share the same frequency range.

A1 and A2 share the same frequency range.

Band Frequency indication indication

2 Press TUNE i, then rotate the Jog Dial to set the hour.

Press TUNE k, then rotate the Jog Dial to set the minute.

Rotate the Jog Dial clockwise to go forward. Rotate the Jog Dial counterclockwise to go backward.

3 Press SELECT.

The clock starts working from 0 second.

To have the clock displayed when the unit is on

Press DISP. To return the unit to its former display, press DISP again.

2 Press (and hold for more than 2 seconds) either TUNE i or TUNE k to tune in the desired station.

The unit starts scanning and tunes in a station automatically (seek tuning).

Press TUNE i to increase and TUNE k to decrease the frequency.

Press the button again to cancel seek tuning. Repeat the procedure until the desired station is tuned in.

Note

If you press (for less than 0.5 second at a time) either TUNE ior TUNEk, the frequency increases or decreases step by step.

3 Adjust the volume with the Jog Dial.

5 ENGLISH

Page 43
Image 43
Aiwa 570CDCMP3 Setting the Clock Radio Operation, To turn the unit on, Press Select, Adjust the volume with the Jog Dial