MAINTENANCESPECIFICATIONS
Cleaning the front panel
When the front panel is soiled, wipe the surface of the panel with a soft, dry cloth.
Cleaning the connector
The connector on the reverse side of the front panel needs to be cleaned occasionally. Wipe the surface of the connector with a cotton swab slightly moistened with alcohol.
If the display is distorted in any way, cleaning the connector is recommended.
RADIO SECTION (FM)
Frequency Range: | 87.5 MHz – 108 MHz |
| |
| 87.5 MHz – 108 MHz |
| |
Usable Sensitivity: | 12.7 dBf |
50 dB Quieting Sensitivity: | |
| 17.2 dBf |
IF Rejection: | 80 dB |
Frequency Response: 30 Hz – 15,000 Hz | |
S/N Ratio: | 63 dB |
Stereo Separation: | 35 dB at 1 kHz |
Alternate Channel Selectivity: | |
| 70 dB |
Capture Ratio: | 3 dB |
(AM)
Frequency Range: | 530 kHz – 1,710 kHz | |||
|
|
|
| |
|
|
|
| 531 kHz – 1,602 kHz |
|
|
|
| |
Usable Sensitivity: | 30 µV (30 dB) | |||
|
|
|
|
|
|
|
|
|
|
*Set the frequency increment for your area using the switch on the bottom of the unit.
(The switch is set at the factory to the 10k position [for the U.S.A.])
CD SECTION
Frequency Response: 17
Dynamic Range: | More than 80 dB |
Channel Separation: | More than 65 dB |
S/N Ratio: | More than 85 dB |
Wow/Flutter: | Unmeasurable |
MP3 decoding: | MPEG 1 Audio Layer 3 |
AUDIO SECTION
Max. Power Output: 45 W × 4 channels
AUX IN input
Input sensitivity (load impedance)
AUX IN: | 300 mV (10 kΩ) |
