STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT
2 Wind the belt d around the rim of the steering wheel and fit the holder’s claws into the holes of the belt to secure the holder. The excess must be trimmed off, as illustrated.
3 Attach the outer belt holder fsecurely to the inner belt holder.
4 Attach the remote control unit to the belt holder. Align the claws of the inner belt holder with the grooves of the remote control unit, then slide the remote control unit while pressing the unit toward the holder to secure it. You can slide the unit toward either side, depending on the installation location.
Note
When you install the remote control unit in a vehicle with
