RADIO RECEPTION

MANUAL TUNING

 

ENTER

0-9,+10

 

TUNER

MULTI JOG

FUNCTION

MODE

 

 

C

 

 

i/k/j/l

 

 

ENTER

 

TUNING

 

 

INPUT MODE

SHIFT

POWER 6STANDBY/ON

 

1Turn FUNCTION to select the desired band; FM or AM.2Press TUNING N/Mto tune in a station.

Alternatively, press jor lon the remote control. “TUNE” is displayed when a station is tuned in. “1” is displayed for FM stereo reception.

To search for a station automatically (Auto search)

Hold down TUNING Nor M(or jor l).

The unit searches for a station and stops at reception.

To stop the search manually, press TUNING Nor M(or jor l).

• Auto search may not stop at stations with weak signals.

When an FM stereo broadcast contains noise

Hold down SHIFT and press TUNER MODE on the remote control so that “MONO” is displayed.

Noise is reduced, although reception is monaural.

To cancel, repeat the above so that “STEREO” is displayed.

When the reception contains noise interference

Move the unit away from other electrical appliances, especially digital audio devices, or turn off the appliances that generate noise signals.

To switch the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Hold down INPUT MODE and press POWER 6STANDBY/ON. To reset the interval, repeat this procedure.

NOTE

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

PRESET TUNING

You can preset up to 32 stations and tune them in directly.

RECEPTION

 

PRESETTING STATIONS

1

Tune in the desired station.RADIO

2

Press ENTER to store the station.

 

The preset number, beginning from “1” appears on the display.

3

Repeat steps 1 and 2 to store other stations.

 

 

The next station will not be stored if a total of 32 preset stations

 

 

have already been stored. (“FULL” is displayed.)

 

TUNING IN PRESET STATIONS

1Turn FUNCTION to select FM or AM.2Turn MULTI JOG to select a preset number.

Alternatively, press ior kon the remote control.

You can tune in the desired preset station directly by pressing the numbered buttons on the remote control.

-To select preset number 11, press +10 and 1.

-To select preset number 25, press +10, +10 and 5.

To clear a preset station

1Tune in the station by preset tuning.

2Press ENTER, and press ENTER again while the frequency flashes on the display.

Alternatively, press ENTER or C on the remote control, and En press ENTER while the frequency flashes on the display.

ENGLISH 12