Operating CD players Press the following buttons. POWER - Turns on/off the power. c- Starts playback.

a- Pauses playback. s- Stops playback.

f,g- Searches for a track. r,t- Skips a track.

0-9, +10 - Selects a track.

PRGM while pressing SHIFT - Enters the programmed play mode. RANDOM while pressing SHIFT - Enters the random play mode. REPEAT while pressing SHIFT - Enters the repeat play mode.

NOTE

There are some AIWA models that cannot be operated with the remote control, or for which some of the functions of the remote control do not work.

BEFORE OPERATION

POWER

POWER 6STANDBY/ON

SPEAKERS DISPLAY

DIMMER

PHONESSHIFT

To turn the unit onPress POWER 6STANDBY/ON (POWER).

The STANDBY/ON indicator lights in green.

Operation is possible after four seconds. The volume level or function name is displayed one after the other for the first four seconds.

To change the brightness level of the displayPress DIMMER (hold down SHIFT and press DISPLAY) repeatedly.

The dimmer mode changes as follows.

DIM-OFF

 

DIMMER 1

 

DIMMER 2

 

 

DIMMER 3 (No display)

DIM-OFF: The normal display

DIMMER 1: The illumination of the display is dimmer than usual.

DIMMER 2: The illumination of the display is dimmer.

DIMMER 3 (no display): Everything on the display is cleared.

NOTE

While in the mode other than DIM-OFF, if you operate the receiver, the display illuminates at the DIM-OFF level, and after 6 seconds, the display brightness returns to the level previously set.

Note that “DIMMER” is displayed for one second before everything is cleared when the previously set level is “no display”.

Using the headphones

Connect headphones with a standard stereo plug (ø6.3 mm, 1/4 inch) to the PHONES jack. Be sure to turn off the speakers by pressing SPEAKERS. Otherwise sound is output from the speakers.

To turn the unit off, press POWER 6STANDBY ON (POWER). The STANDBY/ON indicator turns to red.

8 ENGLISH