POSITIONING THE SPEAKERS

Position the speakers to make the most of Dolby, DTS or DSP surround effect.

Front speaker (L/R)Center speaker (C)

Position in the center of the two front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.

Surround speakers (LS/RS)

Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.

Sub woofer (SW)

Place the sub woofer in any place near the two front speakers.

When not connecting the sub woofer

Select the “SUBW OFF” mode.

1Press and hold SPEAKERS until “FR LARGE” is displayed.

2Within 6 seconds, turn MULTI JOG so that “SUBW ON” is displayed.

3Press ENTER.

4Within 6 seconds, turn MULTI JOG so that “SUBW OFF” is displayed, then press ENTER.

Turning on/off the front speakers

Each time you press SPEAKERS on the front panel, the front speakers are turned on and off. When the front speakers are turned on, “SP3” lights up on the display window.

NOTE

•When you turn off the front speakers, the surround mode (Dolby Digital, Dolby Pro Logic or DTS) or the DSP mode will be canceled.

•When the front speakers are turned off, SURROUND and DSP on the front panel cannot be used. (“CAN’T USE” will be displayed).

CONNECTING THE SUPPLIED

ANTENNAS 2

Connect the FM antenna to the FM 75Ω terminal and the AM antenna to the AM LOOP jack.

FM antenna

AM antenna

 

 

 

LO

OP

 

 

 

 

 

 

TENNA

AM

 

 

AN

 

 

 

 

 

 

75

Ω

 

 

 

 

 

 

 

AXIAL)

 

 

 

FM

 

 

 

 

(CO

 

 

 

 

To stand the AM loop antenna on a surface

Fix the claw to the slot as shown in the illustration.

To position the antennas

Keep antennas away from metallic objects, electrical equipment (including the unit itself) and cords.

FM antenna: Extend fully and position for the best reception. If reception is poor, connect an optional outdoor antenna to the FM 75Ω terminal.

AM antenna: Rotate to find best reception.

6 ENGLISH