PROGRAMMED PLAY

Up to 30 tracks can be programmed from the disc.

1 In stop mode, keep * s MEMORY pressed until “M” flashes in the display.

* or s STOP on the remote control

2 Press r or t to select a track, then press s MEMORY to store it.

Track number

Programmed number

To select a track with the remote control

Press the numbered buttons 0-9 and +10.

3 Repeat step 2 to program other tracks.

4 Keep s MEMORY pressed until “M” stops flashing to finish the program.

“M” remains displayed and indicates the unit stores the programmed tracks.

5 Press e to start play.

To check the program, press r or t in stop mode.

To clear the program, press s once in stop mode so that “M” disappears in the display.

To change the programmed tracks, clear the program and repeat all the steps again.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.

1 Keep REPEAT/SLEEP/FM MODE/OSC pressed until “30” flashes in the display.

2 Within 4 seconds, press r or t to specify the time until the power is turned off.

Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps.

Specified time

 

While the sleep

 

timer works, the

 

dot keeps flashing.

 

To check the time remaining until the power

En

is turned off

 

Repeat step 1 shown above. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Display the remaining time and press r or t repeatedly until OFF is displayed.

NOTE

If the unit is turned off during tape playback, c on the deck will not be released. Press Z to release c.

ENGLISH 9