C TAPE OPERATION

•Use Type I (normal) tapes only.

•Note that recording is done on only one side of the tape.

INSERTING A TAPE

Press Z to open the cassette holder and insert a tape with the exposed side down and the side to be played facing out.

Deck 1

Deck 2

Push the cassette holder to close.

PLAYING A TAPE

Press c while the power is off.

The power is turned on and play of the inserted tape begins.

The volume level is displayed during tape operation.

Z – Stops play. The power will be automatically turned off.

a – Pauses play. To resume play, press again. f/g – Rewinds/ fast forwards. To stop the winding, press Z.

Continuous play

After play on deck 2 finishes, play on deck 1 will start without interruption.

During play on deck 2, press a then press c on deck 1.

a on deck 1 will be released at the end of play on deck 2.

RECORDING FROM A CD OR THE

TUNER

1 Insert a tape to be recorded on into deck 1

with the side to be recorded facing out.

Deck 1

2 Get ready to record from the source.

To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station.

3 Press w on deck 1 to start recording.

c is pressed simultaneously.

When the selected function is CD, CD play and recording starts simultaneously.

To record only the selected tracks of a CD

1Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks.

2Press w.

To stop recording, press Z on deck 1. To stop CD play, press s STOP/MEMORY.

To pause recording, press a. To resume recording, press again.

To erase recording, press w on deck 1 while the power is off.

After recording, press TAPE/POWER/6STANDBY to turn the power off.

10ENGLISH