Aiwa CSD-TD27, CSD-TD26, CSD-TD66, CSD-TD28 operating instructions Specifications, Copyright

To check the program, press r or t in stop mode.

To clear the program, press sonce in stop mode so that “M” disappears in the display.

To change the programmed tracks, clear the program and repeat all the steps again.

Press e to start play.

5

2 Press r, tto select a track, then press sSTOP/MEMORY to store it.

Track number

Programmed number

To select a track with the remote control (CSD- TD66 only)

Press the numbered buttons 0-9 and +10.

3 Repeat step 2 to program other tracks.

4 Keep s STOP/MEMORY pressed until “M” stops flashing to finish the program. “M” remains displayed and indicates the unit stores the programmed tracks.

on the remote control (CSD-TD66 only)

* or s

sSTOP

(CSD-TD66 only)

PROGRAMMED PLAY

Up to 30 tracks can be programmed from the disc.

1 In stop mode, keep * sSTOP/MEMORY pressed until “M” flashes in the display.

cPLAY

0-9, +10

REPEAT

aPAUSE

r, t￿

SKIP/SEARCH

Specifications

Tuner section

Frequency range, antenna — FM: 87.5 - 108.0 MHz

Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna

Deck section

Track format — 4 tracks, 2 channels / Frequency range

—Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system — AC bias / Erasing system — Magnet erase / Heads — Recording/playback head (1), Erasure head

(1)

CD player section

Disc — Compact disc / Scanning method — Non- contact optical scanner (semiconductor laser)

General

Speaker — 100 mm cone type (2) / Output — Headphones jack (stereo mini-jack) / Power output —

2.5W + 2.5 W (EIAJ 7 ohms, T.H.D. 10% DC) / Power requirements — DC 12 V using eight size C (R14)

batteries, AC 120 V, 60 Hz / Power consumption —

15 W / Dimensions (W × H × D) — 414 × 183 × 235 mm (16 3/8 × 7 1/4 × 9 3/8 in.) / Weight (excluding batteries) —

3.2kg (7 lbs. 1 oz.) / Accessory — Remote control (1, CSD-TD66 only), AC cord (1)

Specifications and external appearance are subject to change without notice.

COPYRIGHT

Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used.

If an erroneous display or malfunction occurs

Make sure that none of the deck operation buttons is pressed.

Press swhile pressing TAPE/POWER/6STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display.

Leave the unit for a while and turn the power back on.

ENGLISH 7

En