Aiwa CT-X417 manual Mute button, Loud loudness button, Press i-l To adjust the sound quality

~SOuNDADJUsTMENTs

I Press SELECT to select the mode that you went to adjust from: VOL (volume), BASS (bass), TRE (treble), BAL (balance) and FAD (fader).

	The following indications are displayed in cyclic order.
	The selected mode changes to that of the volume mode when
	SELECT is pressed for more than 5 seconds.
I	z Press i-l–	to adjust the sound quality.
	Quickly press (less than 0.5 second) either side of the button
	to change the level in small steps. Press and hold either side
	of the button to change the level rapidly.
	Adjust each mode referring to the audio control indicators in
	the display window (see page 6).

Decreases the bass Increases the bass

levellevel

Decreases the level Decreases the level

=

speaker~s)speaker(s)

Decreases the level Decreases the level of the rear speakers of the front

soeakers

Without selecting any mode with SELECT, only the volume level can be adjusted by pressing +/-.

MUTE button

Press this button to temporarily lower the volume level. Press it again to restore the previous volume level.

LOUD (loudness) button

Press this button to boost both bass and treble while listening with low volume level.

EN

7